OX Pro S450 Half Mask Respirator Filters

OX Pro S450 Half Mask Respirator Filters

OX Twin Filter Cartridges in Hang bag

• Pack of 2 replaceable cartridges
• Designed to fit the Ox S450 half-mask respirator
• Cartridges available in P2 Filter, P3 Filter and ABEX1 Filter

P2 Filters: Medium Efficiency Dust

• Welding (Ferrous & Lead)
• Soft Wood
• Fibres & Fibre Glass
• Painting Manual Prep (sanding)
• Painting Powered Prep (sanding)

P3 Filters: High Efficiency Dust

• Silica Dust
• Concrete & Stone Cutting
• Plaster Dust
• Welding (Ferrous & Lead)
• Hard Woods
• Asbestos Removal
• Fibres & Fibre Glass
• Water Based Paints (brush and spray applied)
• Painting Manual Prep (sanding)
• Painting Powered Prep (sanding)
• Glyphosate (Weed Killer)

ABEX1 Filters: Low Capacity Gas/Vapour

• Resins
• Solvent Based Paints (brush and spray applied)
• Chemical Paint Stripping
• White Spirit
• Chlorine
• Brick Acid

*Wel (Workplace exposure Level) - This table is for guidance purposes only. A proper risk assessment by qualified personnel should be carried out before selecting an appropriate filter cartridge. Not supplied with OX Pro S450 Half Mask Respirator.

Offers Protection from
ABEX1 Filters: Low Capacity Gas/Vapour
Resins
Solvent Based Paints (brush and spray applied)
Chemical Paint Stripping
White Spirit
Chlorine
Brick Acid
*Wel (Workplace exposure Level) – This table is for guidance purposes only. A proper risk assessment by qualified personnel should be carried out before selecting an appropriate filter cartridge.